Air Conditioning Condenser Fan Assembly; Air Conditioning Condenser Assembly - Toro Groundsmaster 360 Service Manual

Air Conditioning Condenser Assembly

g036619
1. Cab frame
2. Cab headliner assembly
3. Air conditioning condenser
assembly
Removing the Air Conditioning Condenser Assembly
Groundsmaster 360
16225SL Rev C
4. Knob (2 each)
5. Condenser fan assembly
6. Flange nut (4 each)
1. Park the machine on a level surface, lower the cutting deck, shut off the
engine, set the parking brake, and remove the key from the key switch.
2. Remove the roof panel from the top of the cab to get access to the air
conditioning condenser assembly; refer to
(page 8–10).
3. Remove the condenser fan assembly from the machine; refer to
the Air Conditioning Condenser Fan Assembly (page
4. Read the General Precautions for Removing and Installing the Air
Conditioning System Components (page
Figure 327
8–4).
Page 8–17
7. Strip seal (2 each)
8. Edge seal (2 each)
Removing the Roof Assembly
Removing
8–15).
Operator Cab: Service and Repairs