Assembling the Transmission (continued)
Groundsmaster 360
16225SL Rev C
g033424
1.
Filter bypass plug
52. Lubricate the filter bypass valve and spring with clean hydraulic fluid and
install them into the pump body.
53. Lubricate new O-ring and install the O-ring onto the plug. Install the plug into
the pump body; torque the plug to 23 to 26 N∙m (17 to 19 ft-lb).
g033476
1.
Sleeve
2.
Spool
3.
Pin
4.
Sleeve holes
Figure 130
2.
Filter bypass valve
Figure 131
5.
Spool step
6.
Solenoid valve stem
7.
Solenoid coil
Page 4–127
Hydraulic System: Service and Repairs