About Screen - Toro Groundsmaster 360 Service Manual

About Screen

Groundsmaster 360
16225SL Rev C
g187134
1. About menu
2. Left/right button
3. Down button
The about screen (Figure
number, and software revision for the machine. If the correct passcode (PIN) has
been entered (refer to the Protected Menus in the
the Toro Electronic Controller (TEC), InfoCenter, and engine ECU software is
displayed, and the CAN−bus status will be visible. Press the down button to scroll
through the screen items (as indicated by the
information found in the about screen can only be edited by your Toro Distributor.
To return to the previous screen, press the menu/back button (as indicated by
the at the bottom of the screen).
Figure 181
4. Menu/back button
5. About items
181) identifies the machine model number, serial
Page 5–27
Settings Screen (page
at the bottom of the screen). The
Electrical System: InfoCenter Display
5–24)),