Transmission - Toro Groundsmaster 360 Service Manual

Transmission

g036041
1. Locknut (4 each)
2. Driveshaft assembly
3. Roll pin (2 each)
4. Bolt (2 each)
5. Bolt (2 each)
Removing the Transmission
Hydraulic System: Service and Repairs
6. Lock washer (2 each)
7. Gear pump assembly
8. Spline coupler
9. O-ring
10. Bolt (35 mm long)
Before opening the hydraulic system, operate all the hydraulic
controls to release system pressure and avoid injury from the
pressurized hydraulic fluid; refer to
Hydraulic System (page
Figure 73
11. Lock washer (7 each)
12. Bolt (50 mm long)
(6 each)
13. Tube support
14. Engine
15. Flywheel housing
CAUTION
Releasing Pressure from the
4–5).
Page 4–92
16. Dowel pin (2 each)
17. Transmission assembly
18. Seal shield
19. Bolt (4 each)
Groundsmaster 360
16225SL Rev C