Toro Groundsmaster 360 Service Manual page 314

Testing the Work Light Switch (continued)
Electrical System: Testing the Electrical Components
6. Replace the switch if testing determines that the switch is damaged.
7. If the switch testing is correct and a circuit problem still exists, check the wire
harnesses; refer to Electrical Schematics and Wire Harness Drawings and
Diagrams in Appendix A (page
8. After you complete the testing, connect the machine wire harness connector
to the switch and install the lights switch panel.
9. Install the cab roof; refer to
A–1)—Foldout Drawings.
Roof Assembly (page
Page 5–78
8–10).
Groundsmaster 360
16225SL Rev C