Special Tools; Wheel Hub Puller; Steering Alignment Tools - Toro Groundsmaster 360 Service Manual

Special Tools

Wheel Hub Puller

Steering Alignment Tools

Chassis: Special Tools
You can order these special tools from your Toro Distributor.
g185941
The wheel hub puller allows you to safely remove the wheel hub from the wheel
motor shaft.
Toro Part No. TOR6004
g036986
1. Front alignment tool
The steering alignment tools are used to ensure that the front and rear steering
assemblies are properly centered for steering assembly service. These tools
are required for adjustment of wheel alignment or when replacing the tie rods.
The steering alignment tool kit includes the 2 tools necessary for use on your
machine. One of the tools centers the front steering assembly and the other
centers the rear. The tool kit also includes necessary hardware for attaching the
tools to the machine.
Toro Part No. TOR6019
The front alignment tool (TOR6019-1) requires the following hardware for
attachment purposes:
Figure 251
Figure 252
2. Rear alignment tool
Page 6–4 Groundsmaster 360
16225SL Rev C