Toro Groundsmaster 360 Service Manual page 163

Disassembling the Transmission (continued)
Groundsmaster 360
16225SL Rev C
g033433
1. Forward relief cartridge
2. Reverse relief cartridge
22. Remove the 8 socket-head screws that attach the center case to the
transmission pump housing.
23. Carefully remove the center case assembly from the transmission pump
housing.
24. Remove the 2 pins from the transmission pump housing bores.
25. Remove and discard the gasket.
26. Remove the bypass valves from the center case.
27. Remove and discard the O-rings and back-up rings from the bypass valves.
The forward and reverse relief cartridges are different. For assembly
purposes, label all the relief cartridges.
28. Remove the forward and reverse relief valve cartridges from the center case
and note the location of the relief cartridge for assembly purposes.
Note: You can identify the reverse relief valve cartridges by the groove in the
hex head (Figure 88).
29. Remove the valve plates (item 5 in
the positions of the valve plates so that you can assemble them in the same
position.
g036185
1. Hex plug (6 each)
2. Right flushing valve
Figure 88
3. Hex head groove
IMPORTANT
Figure
Figure 89
3. Left flushing valve
4. Center case
Page 4–105
87) from the center case. Mark
Hydraulic System: Service and Repairs