Toro Groundsmaster 360 Service Manual page 90

Remote Starter Switch (continued)
Hydraulic System: Special Tools
g186163
g035022
1. Starter motor
2. Starter solenoid
After flushing the hydraulic system or replacing a hydraulic component (e.g.,
gear pump, piston pump, or wheel motor), it is necessary to prime the hydraulic
pumps. A remote starter switch
pumps. You can get this switch locally.
When using a remote starter switch, it is highly recommended to
include a 20 A in-line fuse between the battery and switch connector
for circuit protection.
Figure 41
Figure 42
3. B+ terminal
(Figure 40) can be used for priming the hydraulic
IMPORTANT
Page 4–32 Groundsmaster 360
16225SL Rev C