Tec Logic Chart - Toro Groundsmaster 360 Service Manual

TEC Logic Chart

g187849
Groundsmaster 360
16225SL Rev C
Each line of the following chart identifies the necessary component position
(INPUTS) in order for the TEC to energize the appropriate OUTPUTS for
machine operation.
Example: To start the engine with no operator in the seat, when the key switch
is in the S position, the traction pedal is in the N
TART
brake is set, the glow plugs and other necessary engine starting components
will be energized.
Note: For the Start machine function, the PTO switch must be O
deck lift must be in the O
Note: The glow plugs are energized for approximately 6 seconds when the
key switch is turned from O
the key switch is in the S
Figure 186
position.
FF
to R . The glow plugs are also energized when
FF UN
position.
TART
Page 5–35
, and the parking
EUTRAL
and the
FF
Electrical System: Troubleshooting