Toro Groundsmaster 360 Service Manual page 53

Removing the Engine
Groundsmaster 360
16225SL Rev C
1. Park the machine on a level surface, lower the cutting deck, shut off the
engine, set the parking brake, and remove the key from the key switch.
2. Remove the hood; refer to
g037255
1. Screw (4 each)
2. Flange nut (6 each)
3. Cross tube
4. Hose guide (2 each)
g036610
1. Middle temperature sensor
2. Inlet temperature sensor
3. DPF pressure sensor
4. Glow plugs
Removing the Hood (page
Figure 15
5. Flange nut
6. Fuel/water separator
7. Screw
Figure 16
5. "S" starter
6. Ring terminal
7. Connector
8. Connector
Page 3–21
6–68).
Diesel Engine: Service and Repairs