Toro Groundsmaster 360 Service Manual page 109

Test Procedure (continued)
Groundsmaster 360
16225SL Rev C
D. If the engine speed does not drop, the pressure and flow specifications
are not met, the tested transmission piston pump needs to be inspected,
repaired, or replaced as necessary.
18. If the transmission piston pump flow specification is met, and you identify a
traction circuit problem, consider that a wheel motor is worn or damaged;
refer to Testing the Rear Wheel Motor Efficiency (Using Tester with Pressure
Gauges and Flow Meter) (page
19. Release pressure from the hydraulic system; refer to
from the Hydraulic System (page
20. Disconnect the tester from the transmission fitting and hose, and connect the
pump outlet and balancing hoses to the transmission fittings.
21. If necessary, repeat the flow test for other transmission piston pump.
4–52).
4–5).
Page 4–51 Hydraulic System: Testing the Hydraulic System
Releasing Pressure