Toro Groundsmaster 360 Service Manual page 463

Installing the Mixing Box Assembly (continued)
Groundsmaster 360
16225SL Rev C
6. Secure the cover to the mixing box assembly as follows:
A. Position the mixing box cover to the mixing box. Ensure that the wire
harness is routed through recess in side of the mixing box.
B. With the rivet pin in a raised position, insert the rivets through the cover
and into the hole in the mixing box. Press the pin into the rivet to secure
the rivet in place.
7. Operate the heater system to ensure that there are no coolant leaks in the
cab headliner.
8. When you complete all the service in the cab headliner, secure the roof panel
to the top of the cab; refer to Installing the Roof Assembly (page
Page 8–23
8–11).
Operator Cab: Service and Repairs