Service And Repairs - Toro Groundsmaster 360 Service Manual

Service and Repairs

Cutting Deck: Service and Repairs
Do not start the engine and engage the PTO switch when the PTO
driveshaft is disconnected from the cutting deck. If you start the
engine and the PTO shaft is allowed to rotate, serious personal injury
and machine damage could result.
If the PTO driveshaft is disconnected from the cutting deck,
disconnect the PTO solenoid coil connector from the wire harness to
prevent the PTO clutch from engaging unintentionally.
Do not work on the cutting deck with the engine running.
Always shut off the engine and remove the key from the key switch
before working on the cutting deck.
g036991
1. Transmission
2. Coil connector
Before servicing the cutting deck, disconnect the PTO solenoid coil connector
from the wire harness to prevent unintentional engagement of the PTO clutch.
WARNING
CAUTION
Figure 303
3. Solenoid valve and coil
Page 7–4 Groundsmaster 360
16225SL Rev C