Toro Groundsmaster 360 Service Manual page 220

4-wheel drive models with yanmar engine

Hide thumbs Also See for Groundsmaster 360:

Table of Contents

Installing the Deck Lift Manifold Assembly (continued)

Hydraulic System: Service and Repairs

3. Remove the caps and plugs from the hydraulic lines and fittings.

4. Lubricate and install new O-rings on the hydraulic fittings. Use the labels that

you attached during removal, correctly connect the hydraulic lines to the

fittings; refer to

Installing the Hydraulic Hose and Tube (O-Ring Face Seal

Fitting) (page

5. Connect the wire harness connectors to the solenoid coils on the deck lift

6. Check the hydraulic-fluid level in the hydraulic reservoir and add correct

quantity of fluid if necessary; refer to the Operator's Manual.

7. Lower and secure the operator seat.

Groundsmaster 360

16225SL Rev C

Chapters

Table of Contents