Blower Fan - Toro Groundsmaster 360 Service Manual

Blower Fan

g036622
1. Mixing box
2. Rivet (19 each)
3. Mixing box cover
4. Cover insulation
Removing the Blower Fan
Groundsmaster 360
16225SL Rev C
5. Heater core/air conditioning
evaporator assembly
6. O-ring (2 each)
7. Expansion valve
8. Blower fan
Note: The blower fan can be removed and installed with the mixing box (item 1
in Figure 332) attached to the cab headliner.
1. Park the machine on a level surface, lower the cutting deck, shut of the
engine, set the parking brake, and remove the key from the key switch.
2. Remove the roof panel from the top of the cab to get access to the blower
fan; refer to Removing the Roof Assembly (page
3. Read the General Precautions for Removing and Installing the Air
Conditioning System Components (page
Figure 332
10.
11.
12.
8–4).
Page 8–27
9. Screw (6 each)
Freeze switch
Screw (2 each)
Air diverter assembly
8–10).
Operator Cab: Service and Repairs