Installing the Hydraulic Tank (continued)
Hydraulic System: Service and Repairs
2. Install the hydraulic tank to the machine and secure the tank to the frame
with the 4 flange-head screws.
3. Remove the caps or plugs that were installed to the hydraulic hoses and
fittings during the removal process.
4. Use the labels that you attached during tank removal to correctly connect
the hydraulic hoses to the fittings on the hydraulic tank; refer to
Hydraulic Hose and Tube (O-Ring Face Seal Fitting) (page
5. Fill the hydraulic tank with the correct quantity of new hydraulic fluid.
6. Install the hydraulic tank cover to the machine; refer to
(page
6–53).
7. Lower and secure the operator seat.
8. Operate the machine. Check the hydraulic-fluid level and adjust if necessary.
9. Check the hydraulic components for leaks. Tighten any loose connections.
Page 4–78
Installing the
4–8).
Control Console
Groundsmaster 360
16225SL Rev C