Toro Groundsmaster 360 Service Manual page 345

4-wheel drive models with yanmar engine

Hide thumbs Also See for Groundsmaster 360:

Table of Contents

Battery Care (continued)

Groundsmaster 360

16225SL Rev C

4. If corrosion occurs at the battery terminals, disconnect the cables. Always

disconnect the negative (-) cable first. Clean the cable clamps and terminals

separately. Connect the cables with the positive (+) cable first. Apply a layer

of terminal protector (Toro Part No. 107-0392) or a light coat of grease to the

terminals to reduce corrosion after you make the connections.

5. Check the battery-electrolyte level every 25 operating hours and every 30

days if machine is in storage.

6. Maintain the cell level with the distilled or demineralized water.

Note: Do not fill the cells above the fill line.

Electrical System: Service and Repairs

Chapters

Table of Contents