Service Screen - Toro Groundsmaster 360 Service Manual

4-wheel drive models with yanmar engine
Hide thumbs Also See for Groundsmaster 360:
Table of Contents

Advertisement

Service Screen

Groundsmaster 360
16225SL Rev C
g187153
1.
Service screen (hours)
2.
Left/right button
3.
Down button
The service screen
(Figure
including hours and counts. If the correct passcode (PIN) has been entered
(refer to the Protected Menus in the
screen allows access to initiate a manual DPF regeneration, provides information
on DPF ash accumulation, and allows resetting the Service Due timer. To scroll
through the list of service records and view the current values, press the down
button (as indicated by the
To return to the previous screen, press the menu/back button (as indicated by
the
at the bottom of the screen).
Hours provides access to the following information:
Key On (PIN required) identifies the number of hours that the key switch
has been in the O
N
Engine Run identifies the number of hours that the engine has been running.
PTO On identifies the number of hours that the machine has been operated
with the cutting deck engaged.
4-Wheel Steer (PIN required) identifies the number of hours that the machine
has been in the 4-wheel steer mode.
Service Due identifies the number of hours before the next scheduled
maintenance is due. This is a count down timer and the numbers of hours
displayed will decrease as the machine is used.
Service Reset (PIN required) identifies the total number of hours between
scheduled maintenance intervals. Reset the Service Due timer to the service
interval (250 hours) by pressing the left/light button (as indicated by the
the bottom of the screen) and then pressing the down button (as indicated by
the Yes or
at the bottom of the screen).
DPF Regeneration (PIN required) allows an operator or technician to initiate
a stationary regeneration for the exhaust system DPF (diesel-particulate filter)
on the machines with Yanmar diesel engines. If the engine ECU identifies
Figure 177
4.
Menu\back button
5.
Service items
177) contains operational information of the machine
Settings Screen (page
at the bottom of the screen).
position.
Page 5–19
5–24)) the service
Electrical System: InfoCenter Display
at

Advertisement

Table of Contents
loading

Table of Contents