Adding Onus To The Olt And Configuring The Management Service Port - Huawei SmartAX MA5603T Configuration Manual

Access module
Hide thumbs Also See for SmartAX MA5603T:
Table of Contents

Advertisement

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Add ONUs to the OLT and
configure the management
connection and TDM PW
Configure the congestion
control policy and security

14.4.4.3 Adding ONUs to the OLT and Configuring the Management Service Port

Related configurations can be performed for ONUs only after the ONUs are successfully added
to the OLT. After the inband management service port is created and available, you can log in
to the ONUs from the OLT to configure the ONUs.
Context
l
l
Issue 01 (2014-04-30)
Start
service port
Configure the TDM
policy
Configure network
protection
Configure clock
synchronization
Verify services
End
When an ONU is added, related profiles need to be bound to the ONU, including the
dynamic bandwidth allocation (DBA) profile, line profile, and alarm profile.
An ONU can be added in two modes: adding an ONU offline and confirming an ONU
online. Select either mode as required.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14 FTTM Configuration (Base Station Access)
OLT-A/B
OLT-A/B
OLT-A/B
OLT-A/B
OLT-A/B
/ONU
1451

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartax ma5600tSmartax ma5608t

Table of Contents