ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Indicator
3.2.6 Skylight Actuator
The skylight actuator controls the rotating skylight on the aisle containment of the smart
module through the alarm linkage information from the fire extinguishing system or the
control information from the upper computer. The skylight actuator supports E-labels and
wireless networking (802.15.4).
Figure 3-21 Skylight actuator
(1) LOCK/GND
magnetic lock DO
output port
(5) BLINK button
(9) COM2 port
Issue 06 (2020-04-22)
Color
Name
indicator
(2) BUTTON/GND
window open button DI
input port
(6) Status indicator
(10) POE port
Copyright © Huawei Technologies Co., Ltd.
Status
Description
Blinking at
A network is set up, and no node
long
access is allowed (the indicator
intervals
blinks at 0.5 Hz, on for 1sand then
off for 1s).
Blinking at
A network is set up, and node
super short
access is allowed (the indicator
intervals
blinks at 10 Hz, on for 0.05s and
then off for 0.05s).
Blinking
The AC actuator is searching for a
intermittently
network (the indicator blinks at
at super short
super short intervals for 0.5s and
intervals
then turns off for 0.5s).
(3) AI/DI_1 sensor
input port
(7) Address DIP
switch
(11) 48 V power
port
3 Device Description
(4) AI/DI_2 sensor
input port
(8) COM1 port
45