Skylight Actuator - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Indicator

3.2.7 Skylight Actuator

The skylight actuator controls the rotating skylight on the aisle containment of
the smart module through the alarm linkage information from the fire
extinguishing system or the control information from the upper computer. The
skylight actuator supports E-labels and wireless networking (802.15.4).
Figure 3-22 Skylight actuator
(1) LOCK/GND
magnetic lock DO
output port
(5) BLINK button
(9) COM2 port
Issue 02 (2020-09-07)
Color Name
(2) BUTTON/GND
window open button DI
input port
(6) Status indicator
(10) PoE port
Copyright © Huawei Technologies Co., Ltd.
Status Description
Blinking at A network is set up, and no
long node access is allowed (the
intervals indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
Blinking The AC actuator is searching
intermittent for a network (the indicator
ly at super blinks at super short intervals
short for 0.5s and then turns off for
intervals 0.5s).
(3) AI/DI_1 sensor
input port
(7) Address DIP
switch
(11) 48 V power port
3 Device Description
(4) AI/DI_2 sensor
input port
(8) COM1 port
50