Creating An Ecc800 On The Neteco - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Step 4 Set NetEco communications parameters on the ECC800 WebUI.
Table 6-32 NetEco parameters
Path
System
Settings >
NMS
Application >
NetEco >
Communicati
on
Parameters
Table 6-33 Setting the authentication password
Path
System
Settings >
NMS
Application >
NetEco > Set
Authentication
Password
Step 5 Click Submit.
----End

6.9.1.3 Creating an ECC800 on the NetEco

Prerequisites


Issue 05 (2019-09-16)
Parameter
Server IP
Port number
Network port
for link setup
Parameter
Authenticatio
n password
Confirm
authentication
password
You have logged in to the NetEco client by web browser.
You have created modules or container in Data Center Planning.
Copyright © Huawei Technologies Co., Ltd.
Default Setting
Value
192.168.8.1 IP address of the primary NetEco server
1
NOTE
The NetEco IP address and the ECC800 IP
address must be configured in the same
network to ensure normal connection
between the NetEco and the ECC800.
31220 31220
WAN_1 WAN_1 or WAN_2
Default Setting
Value
Modifyme_ Set this parameter based on customer
123 requirements.
NOTE
Requirements for setting passwords:
'a~z','A~Z','0~9','~!@#^*_={}:,
./?-`$'(8-32 characters that
include at least three of the
following types: lowercase
letters, uppercase letters,
digits, and special characters)
N/A N/A
6 Feature Description
158