ECC800 Data Center Controller
User Manual
Prerequisites
Context
After installing or replacing the device or ECC800, set monitoring parameters and add the
device.
5.1 Preparations and WebUI Login
Prerequisites
Procedure
Step 1 Connect a network cable between the PC network port and the WAN_1 port (protected by a
security mechanism) on the ECC800.
Table 5-1 Default IP addresses for the WAN and LAN ports on the ECC800
Port
WAN_1
WAN_2
Issue 05 (2019-09-16)
5
The hardware and cable installation check is complete for controller components
according to data center specifications and requirements.
The device and ECC800 have been powered on.
You have obtained the ECC800 IP address as well as the user name and password used
for WebUI login.
A PC with an IP address in the same network segment as the ECC800 IP address is
prepared, and the PC has connected to the WAN_1 port on the ECC800.
Computer operating system: Windows 7 and later versions
It is recommended that the screen resolution be 1366 x 768 or higher.
Browser: IE9 and later versions; Firefox and later versions; Chrome and later versions
Copyright © Huawei Technologies Co., Ltd.
Power-On Commissioning
Default IP Address
192.168.1.10
192.168.0.10
5 Power-On Commissioning
85