Setting The Glue Tank Temperatures - Horizon Fitness BOOK BINDER BQ-470 Important Information Manual

3-20

Setting the Glue Tank Temperatures

Set the glue tank temperatures.
• Set the temperature using the
buttons on the temperature controller. Change
the digits using the
• The current temperature is indicated on the top
line and the temperature setting is displayed on
the bottom line.
• Setting range: 150°C to 210°C (300°F to
410°F)
When using Horizon HM-403 for the
side glue
• Use 170°C (338°F) as the set-point
temperature.
When using Horizon HM-221 for the
EVA spine glue
• Use 180°C (355°F) as the set-point
temperature.
CAUTION
Do not operate any controls on the
temperature display panel except for the
, and buttons.
This may cause the other settings to be
changed.
After setting the temperature, leave the
buttons alone and do not touch them for
5 seconds.
The new set-point temperature will be entered.
Rotate the glue rollers, and when the glue
temperature is consistent, check to see
whether the temperature is low or high.
and
button.
Side Glue
Glue: When using Horizon
Do not touch
Spine Glue
Current
Temperature
Set-Point
Temperature
Glue: When using Horizon
HM-403
Temperature Controller
Digit Down
Changing Button
Button
Information - Single Operation Side
Glue/ Spine Glue Screen
Glue roller rotate
Warm-Up Screen
3
Current
Temperature
Set-Point
Temperature
HM-221
22064
20101B1
Current
Temperature
Set-point
Temperature
Up
Button
22064
31901A1
22064
31901B1
81