Wiring Connections - Horizon Fitness BOOK BINDER BQ-470 Important Information Manual

7-4

Wiring Connections

WARNING
If the machine's power cable will be
connected directly to a circuit breaker on
the power distribution board at the
building, ask a qualified contractor to do
the job.
Turn the circuit breaker on the power
distribution board off.
Connect the power cable for the main part
of the machine to the power source (power
distribution board).
•Be absolutely sure to connect the grounding
wire.
For 220VAC/ 400 VAC Input:
•Connect the power cable for the main part of
the machine to the secondary terminal board
in the transfomer.
•Connect the power cable for the transfomer to
the power sorce (power distribution board).
Turn the circuit breaker on the power
distribution board on.
For 200 VAC Input:
3-phase 200V
Connect the
power cable.
For 220VAC / 400VAC Input:
u v w
Power cable to the main
Connect the wires to the
part of the machine correct terminals for the
primary input voltage.
Capacity of circuit
breaker at plant: 20A
Capacity of circuit
breaker at plant: 20A
Connect the
power cable.
3-phase
220V/400V
22064
70301A1
215
7