Appendix; Specifications - Horizon Fitness BOOK BINDER BQ-470 Important Information Manual

This chapter lists the specifications and accessories for this machine.
8-1

Specifications

Binding Modes
Number of Carriage Clamps
Book Block Size (Top-Bottom x
Fore-edge)
Book Thickness
Cover Size
Cover Weight Range
Cover Stack Height
Warm-Up Time
Glue Temperature
Maximum Milling Depth
Cycle Speed
Voltage / Frequency
Rated Current
Heat Output
Motors
Heaters
Machine Dimensions
Machine Weight
Noise Level
Temperature and Humidity

8. Appendix

Binding with milling, Binding without milling and Pad binding
4
Max. Top-bottom 320 x fore-edge 320 mm (12.59" x 12.59")
Min. Top-bottom 145 x fore-edge 105 mm mm (5.71" x 4.14" mm)
1.0 to 65 mm (0.040" to 2.560") (The book thickness can be limited depending
on the sheet weight, book size and milling depth.)
Max. 320 x 660 mm (12.59" x 25.98" mm)(up to 352 mm or 13.85" forwards
from the clamp face)(up to 312 mm or 12.28" backwards from the clamp face)
Min. 135 x 225 mm (5.32" x 8.86" mm)(up to 114 mm or 4.49" forwards from
the clamp face)(up to 109 mm or 4.30" backwards from the clamp face)
Bond Paper 81.4 to 302.4 gsm
Max. 150 mm (5.9")
60 min
Spine Glue Tank : EVA 150 to 210 degrees Celsius (302 to 356 degrees Fahrenheit)
(180 degrees Celsius or 356 degrees Fahrenheit for HM-221 glue)
Spine Glue Tank : PUR 110 to 140 degrees Celsius (230 to 284 degrees Fahrenheit)
Side Glue Tank : 150 to 210 degrees Celsius (302 to 410 degrees Fahrenheit) (170
degrees Celsius or 338 degrees Fahrenheit for HM-403 glue)
4 mm (0.157")
Max. 1,350 cycles per hour (EVA)
* The cycle speed changes depending on the operator's working time and the
book thickness.
3-Phase 220 V, 50 / 60 Hz
3-Phase 400 V, 50 / 60 Hz
An external transformer is necessary for 220V / 400V
3-Phase 200 V, 50 / 60 Hz, 12.0 A
13,030 kJ (3,120 kcal)
3.7 kW x 1 , 750W x 1 , 850W x 1, 400W x1 ,
200W x 3 , 100W x 1 , 40W x 1 , 25W x 2
Delivery Stacker: 40W x 1, 60W x 1
650W x 1 , EVA : 2.2kW x 1,
With delivery stacker (short type) and milling blower duct :
3,620(W) x 1,570(D) x 2,000(H) mm (142.6" x 61.9 "x 78.8")
With delivery stacker (long type) and milling blower duct :
3,620(W) x 2,240(D) x 2,000(H) mm (142.6" x 88.2 "x 78.8")
Without delivery stacker and milling blower duct :
3,220(W) x 1,090(D) x 2,000(H) mm (126.8" x 43.0 "x 78.8")
Main Part of Machine : 1,970 kg (4,343 lb), Delivery Stacker AC-470L: 99 kg
(219 lb), Transformer : 106 kg (233 lb)
L eq 78.1 dB
A
°
Temperature 0 to + 40 C (32 to 104
Coated Paper 104.7 to 348.9 gsm
Max. 1,000 cycles per hour (PUR)
PUR : 900W x 1 , 80W x 1
°
F), Humidity 20% to 75%RH
8
219