4-2
Glue-Related Problems
4-2-1 If stringy glue sticks to the nipper
Where to check
Too much spine glue.
4-2-2 If lumps of glue stick to the nipper
Where to check
Too much spine glue
is protruding from the
cover.
The cover sheet is
too shorter than the
book block.
4-2-3 Side glue is not applied
Where to check
The side glue is
turned Off.
The clearance
between the side
glue rollers is too
wide.
The clearance
between the glue
amount adjusting
plate and the rollers
is too narrow.
Cause and solution
• Reduce the amount of spine glue using the
Bookbinding - Fine-Tune Adjustment - Glue
screen.
22064
Cause and solution
• Reduce the amount of spine glue using the
Bookbinding - Fine-Tune Adjustment - glue
screen.
• Reduce the length of the spine glue using the
spine gluing start and end points using the
Bookbinding - Fine-Tune Adjustment - glue
screen.
22064
• The side glue on the extra part of book block
sticks on the nipper. Match the sizes of book block
and cover sheet.
22064
40202B1
Cause and solution
• Turn it On using the side glue On/Off setting
on the Setup – Glue Setting screen.
22064
• Decrease the side glue roller clearance
using the Bookbinding - Fine-Tune
Adjustment - Glue screen.
22064
• Move the glue amount adjusting plate further
away from the rollers.
• Or lower the glue amount adjusting lever to
increase the clearance.
Related
item
1-3-2
Related
item
4
1-3-2
3-2-1
Related
item
1-3-1
1-3-2
3-11
99