The Covers Do Not Stick To The Spines; The Covers Are Bent In The Stacker - Horizon Fitness BOOK BINDER BQ-470 Important Information Manual

4-4 Cover-Related Problems

4-4-5 The covers do Not stick to the spines

Where to check
The nipping delay
time is too long.
The production
speed is too slow.
The glue
temperature is too
low.
A quick-drying glue is
being used.

4-4-6 The covers are bent in the stacker

Where to check
The height of the top
book is too low.
112
Cause and solution
• Reduce the nipping delay time using the
Bookbinding - Fine-Tune Adjustment -
Clamp/Milling/Nipping/Delivery screen.
22064
40303A1
• Increase the production speed.
22064
40405A1
• Increase the temperature using the
temperature controller.
22064
40405B1
• Either use a slower-drying glue or consult
with your glue vendor.
Cause and solution
• Raise the book detecting arm.
22064
40406A1
Related
item
1-3-2
1-3-2
3-20
-
Related
item
1-2-9