Starting Bookbinding - Horizon Fitness BOOK BINDER BQ-470 Important Information Manual

3-6

Starting Bookbinding

Move through these operations by following the operation navigation icons.
Select the bookbinding start mode.
• Select "manual start" or "timer start."
Start the bookbinding by pressing the
Bookbinding Start buttons.
After the safety light beam is unblocked,
there will be a delay period, then the
bookbinding will start automatically.
If no book block is inserted into the clamp
within 20 seconds, the auto start function
is canceled.
• has been selected here as an example.
If necessary, set the preset counter.
• The machine will feed covers for the desired
number of books. That means that no covers
will be scored unnecessarily.
• When
Keypad screen appears.
Press the Bookbinding Start buttons.
The glue rollers start to turn.
The first cover is fed to the standby position.
Feed the book block.
• Insert the book block, and square it up against
the right edge.
When placing the book block in the
carriage clamp, press it against the right
edge.
The sensor which detects the book block
is located near the bottom right of the
carriage clamp.
is pressed, the Numeric
Bookbinding - Operation Screen
Numeric Keypad
Screen
3 0
3 0
Operation
navigation icon
Operation
navigation icon
Book Block
Operation
Navigation Icon
3
Clear Button
22064
30601A1
Bookbinding
Start Buttons
22064
30601B1
22064
30601C1
59