Installation; Moving The Main Part Of The Machine - Horizon Fitness BOOK BINDER BQ-470 Important Information Manual

The procedures in this section should only be done by authorized service
personnel.
7-1

Moving the Main Part of the Machine

Have a cart ready before unloading the
main part of the machine from the truck.
WARNING
This machine weights approximately 2000
kg or 4350 lb. Be very careful when
moving the machine.
Attach eye-bolts at the two locations
shown on the top of the main part of the
machine.
Remove the table, and attach a hoisting
bar.
Open the front right cover, secure it, and
attach a hoisting bars.
Attach the eye-bolts to the hoisting bars.
Use a crane to hoist the main part of the
machine.
•Hoist the machine using the two hoisting bars
and two eye-bolts.
•Place the main part of the machine on a dolly
which can support the machine.
12076
70101I1
Insert the forks of a forklift truck under the
feed end of the machine, and move the
main part of the machine to the location
where you want to install it.
Insert the forks under the main frame and
lift to support the machine from below.

7. Installation

Space required for installation
19.7"
561
1,040
22.1"
500/19.7"
41.0"
255
10.1"
641
1,200 25.3"
47.3"
22064
70101H1
Table
Four Mounting Screws
Center of
gravity
Power : From customer's
Power source
500
3,220/126.7"
1,527
1824/71.9"
60.2"
731/29.0" 731/29.0" 731/29.0"
46/1.90"
786
31.0"
BQ-470 BQ-470 BQ-470
Optional Blower Duct
Setting Bolt
Rated Current
326
12.9"
50 Hz
510
200 V 10.5 A
20.1"
220 V 8.1 A
175
400 V 5.7 A
6.89"
Eye-Bolt
Hoisting Bar
Provide a dolly strong enough to
support the weight of the machine.
Position the forks under
the main frame.
3-phase 200 V
6,200 / 244.1"
500
19.7"
2,240
88.2"
mm/inch
60 Hz
12.0 A
8.7 A
6.5 A
7
22064
70101A1
207