The Carriage Clamp Slows Or Stops During Milling; A Loud Noise Is Heard When The Level Plate Returns - Horizon Fitness BOOK BINDER BQ-470 Important Information Manual

4-7 Problems with the Main Part of the Machine

4-7-10 The carriage clamp slows or stops during milling

Where to check
The milling cutter is
worn.
The cutting depth is
too deep.
The production
speed is too high.

4-7-11 A loud noise is heard when the level plate returns

Where to check
The slide rails of the
level plate are dry.
Cause and solution
• Replace the milling cutter.
22064
40709B1
• Adjust the shims underneath the level plate
to reduce the cutting depth.
22064
40709C1
• Reduce the production speed.
22064
40709D1
Cause and solution
• Lubricate the slide rails.
Lubricate
Lubricate
22064
40712A1
Related
item
5-11
3-8
4
1-3-2
Related
item
5-18-3
125