7-5
Installing the Smoke Extractor
Connect the power cable for the smoke
extractor to the main part of the machine.
Check the direction of rotation of the fan in
the smoke extractor.
(1) Turn the power switch on the main body on.
•The fan should be turn in a clockwise
direction.
If the fan turns counterclockwise
(1) Turn the power switch off.
(2) Turn off the circuit breaker on the power
distribution board.
(3) Exchange the positions of two of the three black
wires used to supply power to the machine.
(4) Turn on the power again, and check that the
fan is turning clockwise.
Connect the hoses.
•Secure the hoses using hose clamps.
216
Connect the power cable for the smoke extractor.
The fan should be
turning clockwise.
If the fan rotates counterclockwise :
Circuit
Breaker
Exchange the
positions of two of
the black wires.
Smoke Extractor
Hose
Clamp
Hose
22064
70401A1
Smoke Extractor
OFF
Grounding
1
2
3
4
Wire
Black
22064
70401C1
22064
70401B1