Replacing The Eva Notching Cutters - Horizon Fitness BOOK BINDER BQ-470 Important Information Manual

5-13

Replacing the EVA Notching Cutters

If the notching cutters are dull, the glue will not be spread over the spine of the book, and the binding strength will be
reduced. If this happens, replace the notching cutters. When changing the types of the notching cutters, replace the
notching cutter by going through the same steps. (See page 8-4 Options for details).
Open the milling guide.
• Press the button.
The Bookbinding – Maintenance screen
appears.
• Press the
Press the Emergency Stop button.
Remove the adjusting side brush and
register guide brush.
• Loose the locking screws using the accessory
stubby driver and remove the register guide
brush.
button.
Bookbinding - Operation Screen
(1)
Maintenance Screen
Rear Milling Guide
(2)
22064
50901F1
Register Side Brush
Adjusting Side Brush
22064
50801A1
157
5