Mitsubishi Electric 800 Series Instruction Manual page 647

REVISIONS
*The manual number is given on the bottom left of the back cover.
Revision Date
Oct. 2016 IB(NA)-0600688ENG-A
Mar. 2019 IB(NA)-0600688ENG-B
Feb. 2022 IB(NA)-0600688ENG-C
Mar. 2023 IB(NA)-0600688ENG-D
646
IB(NA)-0600688ENG-D
*Manual Number
First edition
Added
• Continuous operation during communication fault
• Reset selection/disconnected PU detection/PU stop selection (Pr.75 = "1000 to 1003,
1014 to 1017, 1100 to 1103, 1114 to 1117")
• Automatic restart after instantaneous power failure selection (Pr.162 = "1000 to 1003,
1010 to 1013")
• Error reset operation selection at inverter fault (Pr.349 = "100, 101")
• PLC function (Pr.414 ="11, 12", Pr.675)
• Control method selection (Pr.800 = "109, 110")
• Monitor with sign selection (Pr.1018 = "1")
Added
• Main circuit capacitor life measurement at power OFF (every time) (Pr.259 = "11")
• Pr.506 Display estimated main circuit capacitor residual life
• Current input check terminal selection (Pr.573 = "11 to 14, 21 to 24")
• Low-speed forward rotation command (RLF) signal, Low-speed reverse rotation
command (RLR) signal
• Reset selection after inverter faults are cleared (with the HMS network option
installed)
• Cooling fan operation selection during the test operation (Pr.244 = "1000, 1001, 1101
to 1105")
• Display/reset ABC relay contact life (Pr.507, Pr.508)
• Reset selection after inverter faults are cleared, DriveControl writing restriction
selection (Pr.349 = "1000, 1001, 1100, 1101, 10000, 10001, 10100, 10101, 11000,
11001, 11100, 11101")
• Pr.890 Internal storage device status indication
• Internal storage device fault (E.PE6)
Added
• Restricting reset method for an earth (ground) fault (Pr.249 ="2")
• Output short-circuit detection (Pr.521)
• Torque limit level 2 (Pr.815)
• Deceleration time at emergency stop (Pr.1103, X92 signal)
• Output short-circuit fault (E.SCF)
Edited
• Pr.151, 153 setting range: 0 to 300 s
Revision