Mitsubishi Electric 800 Series Instruction Manual page 529

Hide thumbs Also See for 800 Series:

Table of Contents

• Model information monitor

Inverter type (1st and 2nd characters)

Inverter type (3rd and 4th characters)

Inverter type (5th and 6th characters)

Inverter type (7th and 8th characters)

Inverter type (9th and 10th characters)

Inverter type (11th and 12th characters)

Inverter type (13th and 14th characters)

Inverter type (15th and 16th characters)

Inverter type (17th and 18th characters)

Inverter type (19th and 20th characters)

Capacity (1st and 2nd characters)

Capacity (3rd and 4th characters)

Capacity (5th and 6th characters)

• When a 32-bit parameter setting or monitor item is read and the value to be read exceeds HFFFF, HFFFF is returned.

5. PARAMETERS

5.12 (N) Operation via communication and its settings

Reading inverter type in ASCII code.

"H20" (blank code) is set for blank area.

Example) For the "FR-F860-3",

H46, H52, H2D, H46, H38, H36, H30, H2D, H33, H20...H20

Reading inverter capacity in ASCII code.

Data is read in increments of 0.1 kW, and rounds down to 0.01

kW increments.

"H20" (blank code) is set for blank area.

Example) 0.75K......"7" (H20, H20, H20, H20, H20, H37)

Chapters

Table of Contents