Mitsubishi Electric 800 Series Instruction Manual page 275

5.8.2 Monitor indicator selection using operation panel or via
communication
The monitored item to be displayed on the operation panel or the parameter unit can be selected.
Pr.
52 Operation panel main monitor
M100 selection
774 Operation panel monitor
M101 selection 1
775 Operation panel monitor
M102 selection 2
776 Operation panel monitor
M103 selection 3
170 Watt-hour meter clear
M020
563 Energization time carrying-over
M021 times
268 Monitor decimal digits
M022 selection
891 Cumulative power monitor digit
M023 shifted times
171 Operation hour meter clear
M030
564 Operating time carrying-over
M031 times
290 Monitor negative output
M044 selection
Monitor with sign selection
1018
M045
1106 Torque monitor filter
M050
1107 Running speed monitor filter
M051
1108 Excitation current monitor filter 9999
M052
274
5. PARAMETERS
5.8 (M) Monitor display and monitor output signal
Name Initial value
0
(output
frequency)
9999
9999
0
9999
9999
9999
0
0
9999
9999
9999
Setting range
0, 5 to 14, 17, 18, 20, 23 to Select the monitor to be displayed on the
25, 34, 38, 40 to 45, 50 to operation panel and the parameter unit.
57, 61, 62, 64, 67 to 69, 81 Refer to
to 96, 98, 100 description.
1 to 3, 5 to 14, 17, 18, 20, The output frequency, output current and
23 to 25, 34, 38, 40 to 45, output voltage monitor that are displayed
50 to 57, 61, 62, 64, 67 to in monitor mode on the operation panel
69, 81 to 96, 98, 100, 9999 and the parameter unit can be switched to
a specified monitor.
9999: Follows the Pr.52 setting.
0 Set "0" to clear the watt-hour meter
monitor.
10 Set the maximum value for monitoring via
communication. Set it in the range of 0 and
9999 kWh.
9999 Set the maximum value for monitoring via
communication. Set it in the range of 0 and
65535 kWh.
(0 to 65535) Displays the numbers of times that the
(Read-only) cumulative energization time monitor
exceeded 65535 h. Read-only.
0 Displays as integral value.
1 Displays in 0.1 increments.
9999 No function
0 to 4 Set the number of times to shift the
cumulative power monitor digit.
The monitor value is clamped at the
maximum value.
9999 No shift
Monitor value is cleared when it exceeds
the maximum value.
0 Set "0" to clear the operation hour monitor.
9999 The read value is always 9999. Nothing
happens when "9999" is set.
(0 to 65535) Displays the numbers of times that the
(Read-only) operating time monitor exceeded 65535 h.
Read-only.
0 to 7 Set the availability of output with a minus
sign for the terminal AM, the operation
panel display, or monitoring via
communication. (Refer to
0, 1, 9999 Select items to be displayed with minus
signs.
0 to 5 s The filter time constant is selectable for
monitoring of the torque. A larger setting
results in slower response.
9999 0.3 s filter
0 to 5 s The filter time constant is selectable for
monitoring of the running speed. A larger
setting results in slower response.
9999 0.08 s filter
0 to 5 s The filter time constant is selectable for
monitoring of the motor excitation current.
A larger setting results in slower response.
9999 0.3 s filter
Description
page 275 for the monitor
page 282)