Mitsubishi Electric 800 Series Instruction Manual page 106

4.4.2 JOG operation from the operation panel
• Operate only while
The following shows the procedure to operate at 5 Hz.
Operating procedure
1.
Screen at power-ON
The monitor display appears.
2.
Changing the operation mode
Press twice to choose the PUJOG operation mode. [JOG] indicator is on.
3.
Start → acceleration → constant speed
Keep pressing
deceleration time, and "5.00 Hz" appears.
4.
Deceleration → stop
Release or
time, and the motor stops rotating with "0.00 Hz" displayed.
NOTE
• To change the frequency, change Pr.15 Jog frequency (initial value "5 Hz").
• To change the acceleration/deceleration time, change Pr.16 Jog acceleration/deceleration time (initial value "0.5 s").
Parameters referred to
page 224
Pr.15 Jog frequency
Pr.16 Jog acceleration/deceleration time
or is pressed.
Operation panel
or . The frequency value on the indication increases in Pr.16 Jog acceleration/
. The frequency value on the indication decreases in Pr.16 Jog acceleration/deceleration
page 224
4. BASIC OPERATION
4.4 Basic operation procedure (JOG operation)
3
4
5
4
5
6
7
8
9
10
105