Suzuki RA410 Manual page 748

4
INSTALLATION
1) Install passenger air bag (inflator) module (2) to instrument pan-
el (3).
2
2) Tighten passenger air bag (inflator) module attaching bolts to
specified torque.
Tightening Torque
(a): 23 N·m (2.3 kg-m, 16.5 lb-ft)
3) Tighten passenger air bag (inflator) module attaching screws
(4).
4) Connect negative cable to battery.
3
5) Enable air bag system. Refer to ENABLING AIR BAG SYSTEM
of SERVICE PRECAUTIONS in this section.
(a)
1
DRIVER AIR BAG (INFLATOR) MODULE
Refer to DRIVER AIR BAG (INFLATOR) MODULE in SECTION 3C
for removal, inspection and installation.
CONTACT COIL AND COMBINATION
SWITCH ASSEMBLY
Refer to COMBINATION SWITCH/CONTACT COIL AND COM-
BINATION SWITCH ASSEMBLY in SECTION 3C for removal, in-
spection and installation.
SEAT BELT PRETENSIONER (IF EQUIPPED)
Refer to FRONT SEAT BELT WITH PRETENSIONER in SECTION
10 for removal, inspection and installation.
AIR BAG SYSTEM 10B-53