Suzuki RA410 Manual page 230

5-26 BRAKES
1
3
1
LH steering vehicle
5
1
2
3
MASTER CYLINDER
1
4
13 N·m (1.3 kg-m)
3) Apply water tight sealant where plate and cable contact, and run
parking brake cable (1) through brake back plate (2) and secure
it with clip (3).
"A": Sealant 99000-31090
4) Install wheel cylinder, and tighten wheel cylinder bolts and
brake pipe flare nut to specified torque. (Refer to WHEEL CYL-
INDER INSTALLATION of this section.)
5) For procedure hereafter, refer to WHEEL CYLINDER INSTAL-
LATION of this section.
3
: Tightening Torque
: Do not reuse
2
1. Reservoir
2. Primary piston
: Apply brake fluid
3. Secondary piston
: Apply fluid to piston cup
4. Master cylinder
5. Gromment
: Apply brake fluid