Suzuki RA410 Manual page 497

7A-4 MANUAL TRANSMISSION
GEAR SHIFT MECHANISM
The gear shifting control system consists of the following main parts. Movement of gear shift control lever is trans-
mitted to gear shift & select shaft through gear shift and gear select cables.
Gear shaft
Gear select
1. Gear shift control cable
2. Gear select control cable
3. Select cable lever
4. Shift cable lever
5. Gear shift control lever
6. Clamp
7. Control cable grommet cover
9
15
10
A
16
17 23 N·m (2.3 kg-m)
8. Gear shift/select shaft
9. Reverse gear shift lever
10. Gear shift/select lever
11. Fifth gear shift fork
12. High speed gear shift fork
13. Low speed gear shift fork
14. Reverse gear shift arm
23 N·m (2.3 kg-m)
8
B
23 N·m (2.3 kg-m)
23 N·m (2.3 kg-m)
11
12
15. Reverse gear shaft lever bolt
: Apply thread lock cement 99000-32110
to joint seam of T/M right case.
16. Gear shift interlock guide bolt
: Apply sealant 99000-32110 to thread.
17. 5th to reverse interlock guide bolt
: Apply sealant 99000-32110 to thread.
: Tightening Torque
14
13