Suzuki RA410 Manual page 583

7B-56 AUTOMATIC TRANSMISSION
COUNTER SHAFT
1
2, (a)
DISASSEMBLY
1) Remove caulking from nut and remove nut and washer.
2) Using press (1), remove reduction driven gear (2).
3) Using special tool, remove bearing from counter shaft (1).
ASSEMBLY
Assemble parts in reverse order of disassembly, noting following
3
points.
: Tightening Torque
: Do no reuse
Special Tool
(A) : 09941-84510
Apply A/T fluid to press-fitting surface.
Install reduction driven gear (1) to counter shaft. Be sure to match
splines before press-fitting.
Replace counter shaft nut (2) with a new one, tighten to specified
torque and caulk nut with punch (3).
Tightening Torque
.
(a): 55 N m (5.5 kg-m, 29.0 lb-ft)
55 N·m (5.5 kg-m)
,
1. Bearing
2. Counter shaft
3. Reduction driven gear
4. Shim
5. Nut