6A4-42 ENGINE MECHANICAL
5) Apply sealant "A" to intake camshaft end housing sealing sur-
face area as shown in figure.
"A": Sealant 99000-31150
6) After applying oil to housing bolts, tighten them temporarily
first. Then tighten them by following numerical order in figure.
Tighten a little at a time and evenly among bolts and repeat
tightening sequence two or three times before they are tight-
ened to specified torque.
Tightening Torque
11 N·m (1.1 kg-m, 8.0 lb-ft)
7) Install timing chain with crankshaft sprocket.
Refer to "TIMING CHAIN AND CHAIN TENSIONER".
8) Install timing chain cover.
Refer to "TIMING CHAIN COVER".
9) Check valve lashes as previously outlined.
10) Install cylinder head cover and oil pan as previously outlined.