Suzuki RA410 Manual page 161

1
1
(1)
(A)
8) Disconnect tie rod end (1) from steering knuckle (2) with spe-
cial tool.
Special Tool
(A): 09913-65210
9) Loosen strut bracket nuts (1).
10) Remove ball joint bolt (1).
11) Remove strut bracket bolts from strut bracket and then steer-
ing knuckle (2).
DISASSEMBLY
1) Uncaulk and remove dust cover (1).
2) Remove circlip.
3) Using hydraulic press (1) and special tool, remove wheel bear-
ing.
Special Tool
(A): 09913-75810
CAUTION:
When installing wheel bearing, replace it with new
one.
FRONT SUSPENSION 3D-13