Suzuki RA410 Manual page 735

10B-40 AIR BAG SYSTEM
STEP
2 1) Clear DTC (Refer to DIAGNOSTIC
TROUBLE CODE (DTC) LEARANCE).
2) Check DTC (Refer to DIAGNOSTIC
TROUBLE CODE (DTC) CHECK).
3) Is DTC 61 set?
NOTE:
Upon completion of inspection and repair work, perform following items.
1) Reconnect all air bag system components, ensure all components are properly mounted.
2) Repeat AIR BAG DIAGNOSTIC SYSTEM CHECK to confirm that the trouble has been corrected.
DTC 71 – INTERNAL SDM FAULT
DTC WILL SET WHEN:
An internal SDM fault is detected by SDM.
CAUTION:
Be sure to perform AIR BAG DIAGNOSTIC SYSTEM CHECK before starting diagnosis according to
flow table.
NOTE:
DTC 71 can never be cleared once it has been set.
1) Ignition switch OFF.
2) Replace SDM.
3) Repeat AIR BAG DIAGNOSTIC SYSTEM CHECK.
ACTION YES
Substitute a known-
good SDM and recheck.
NO
Recheck air bag system.
Refer to AIR BAG DIAGNOS-
TIC SYSTEM CHECK.