5-32 BRAKES
(a)
1
A
10) Install cap and tighten it to specified torque, then confirm the
"A"
INSPECTION AFTER ASSEMBLY (FOR RH STEERING VE-
HICLE)
1) Install radiator cap test with special tool to master cylinder port
(A)
2) Apply air and confirm that pressure is not applied.
3) Set master cylinder on vise and adjust "A" to be the following.
4) Apply air with radiator cap tester, and confirm that 50kPa pres-
5) Perform same steps 1)–4) for port (2).
2
length "A".
Tightening Torque
(a): 14 N·m (1.4 kg-m, 10.5 lb-ft)
"A": Less than 26 mm (1.02 in.)
(1).
Special Tool
(A): 09952-46010
"A": 50 mm (1.97 in.)
sure is applied.