6G-10 CRANKING SYSTEM
PINION AND OVER-RUNNING CLUTCH
Inspect pinion for wear, damage or other abnormal conditions.
Check that clutch locks up when turned in direction of drive and ro-
tates smoothly in reverse direction. Replace if necessary.
Inspect spline teeth (1) for wear or damage. Replace if necessary.
Inspect pinion for smooth movement.
1
FRONT HOUSING BUSH
Inspect bush for wear or damage. Replace if necessary.
ARMATURE SHAFT BUSH
Inspect bush for wear or damage. Replace if necessary.
PLUNGER
Inspect plunger for wear. Replace if necessary.