Suzuki RA410 Manual page 74

1B-22 AIR CONDITIONING (OPTIONAL)
1. Armature plate
2. Screw
3. Washer
REMOVAL
1) Remove compressor from vehicle. Refer to COMPRESSOR in
this section.
2) Fix armature plate with special tool (A) and remove armature
plate screw.
Special Tool
(A): 09991-06020
NOTE:
Do not reuse armature plate nut.
3) Using special tool (B), remove armature plate.
Special Tool
(B): 09991-06030
1. Armature plate
4) Remove lead wire clamp.
5) Remove felt ring and shims from shaft.
6) Using special tool (C), remove circlip.
Special Tool
(C): 09900-06107
7) Remove magnet clutch lead wire clamp screw, and disconnect
magnet clutch read wire.
8) Remove magnet clutch with puller.
NOTE:
Be careful not to damage pulley when tapping magnet
clutch.
9) Remove magnet clutch coil.
1. Puller
2. Compressor