Suzuki RA410 Manual page 165

2
3
4) Remove suspension control arm bolt (1).
5) Remove suspension control arm (2) while removing stabilizer
bar (3).
DISASSEMBLY
1) Cut off collar of bushing (1) as shown.
2) Set collar cut section to special tool and remove bushing.
Special Tool
(A): 09943-77910
ASSEMBLY
Press-fit bushing by using special tool and press.
Special Tool
(A): 09943-77910
CAUTION:
Be sure to use new bushing.
Press-fit bushing so that dimensions "A" and "B" in figure be-
come equal.
FRONT SUSPENSION 3D-17