Inspection Of P/S Control Module Circuit - Suzuki RA410 Manual

2
1
2
TERMINAL ARRANGEMENT OF P/S CONTROL MODULE COUPLERS (VIEWED FROM HARNESS SIDE)
C1
C2
C3
INSPECTION OF P/S CONTROL MODULE
CIRCUITS
P/S control module (1) and its circuits can be checked at P/S con-
trol module wiring couplers (2) by measuring voltage and resis-
tance.
CAUTION:
P/S control module cannot be checked by itself. It is
strictly prohibited to connect voltmeter or ohmmeter to
P/S control module with coupler disconnected from it.
Voltage Check
1) Remove steering column lower cover with ignition switch OFF
2
position.
2) Check voltage at each terminal with couplers (2) connected P/S
control module. Each voltage should be as specified in the fol-
lowing page.
NOTE:
As each terminal voltage is affected by the battery voltage,
confirm that it is 11V or more when ignition switch is ON.
C5
C4
ELECTRICAL POWER STEERING (P/S) SYSTEM 3B1-17
A1
A3
A4 A5
A2
A8
A7
A6
B1 B2
B3 B4