Suzuki RA410 Manual page 656

9-14 BODY SERVICE
1
Front
45 25
1
2
1
1
REAR DOOR WINDOW REGULATOR
REMOVAL
1) Remove door glass, referring to steps 1) to 8) of REAR DOOR
2) Disconnect power window motor lead wire at coupler and clamp
3) Remove door window regular mounting screws (1) and take out
INSPECTION
1) Check regulator sliding and rotating parts for greasing (1).
1
2) Check rollers (2) for wear and damage.
1
INSTALLATION
Reverse removal procedure.
Secure door sealing cover with adhesive (1).
Install door window regulator handle (1) so that it has a 45 angle
when glass is fully closed, as shown in left figure.
GLASS REMOVAL in this section.
(if equipped).
regulator through hole as shown in left figure.